Видео

Buy yourself a bench power supply,they are not expensive. A 30v-10A will help you out on many projects.

Please next time. Leave the good battery on the charger until it is full. And then use it to charge the other one.

Use the 12 volt charger. The old one. It bypasses it and will start charging no matter what. And when you buy a foldable solarpanel like 200 Watt then you can charge a BL1850 or BL1860 by the sun. And what you also can do is buy several adapters from wish. Put them on a piece of wood. Connect the correct poles to the 12 charger. And leave all of them for a couple of hours in the sun and the charger connected to the solarpanel through a 12 volt inverter. Then you do not have to change the batteries.

Good video, very informative, thanks for posting 👌

She’s a beast…

For me it stops at 31%. Can someone please help me.

Thanks

I set it up in my office, but do I have to reconfigure when I mount it outside?

This was such a great tutorial; pleasant voice, great tempo, and satisfied all my needs.

Thanks!

Yes, these functions work with the newest drivers, just use the "Full Driver & Software Package (recommended)". Basically you should NEVER install the old crap that comes on the driver CD. Most of the time it barely works and will probably leave your machine vulnerable to boot.

It says it's connected in everything and why it's downloading the percentages of a sudden.It'll start blinking green real fast and I don't know why

Sadly, it won't always work this way. I have gotten 3 dead Makita batteries from a friend - after I told him I fixed one by replacing the dead cells - none of them will charge on the Makita fast charger DC18RC. 1 has a problem with it's temp sensor. The other 2 have a fault in their control board. As of writing this I have 2 Makita batteries connected + to + and - to -, the same as you :P

Perfect video, helped a bunch!

🥰

これこれ！これが見たかった、実際完璧なサイズないし安いから手直しできれば完璧なサイズが手に入る！

thanks for this video

Nothing i mine, it wont pick up the volta and nothing shown in pref to show connect device

Thank you SO MUCH! I Know this is an old video, but it was incredibly helpful! 👍

Way better than interpreting the picture instructions that comes with it

It's beter to use a power supply. 😎😎

Good job!!

Thank you So MUCH! Life savior!! After soooo many videos and a few months later I was finally able to connect it with the app and remote control by following your clear and accurate instructions! 🫶🏼✨🎉 You are the BEST! Thank you!

Thanks for the video, very helpful

How to set time sleeping?

Hi, thanks for the demo. I dragged out my old Peteme camera to set it up for a project, and your video was very helpful, since I've lost the printed manual. By the way, "IoT" stands for "Internet of Things" which is a broad term for the technology that is used to make various "things" accessible from the internet, which then opens up a world of almost infinite capabilities, like this remotely accessible camera, and everything else we've come to take for granted nowadays. Thanks again!

I can’t thank you enough for a brilliantly explained idea. I had the 2 units together in no time.

Aisa kaun sa blood dalna vah dikhaiye

Show you blood

5 minutes topd 😂

You have to leave the batteries longer Evan though you hear the buzzing it will adjust after 15 minutes.

Thank you so incredibly much for your video!! Been dealing with battery issues, so I wanted to get my alternator checked. Definitely was awesome to be able to do it myself!

Can you charge the blue (12) also? Thanks for the review

Great review im thinking of😂 buying one as I need a tough bag that will drag all my tools around and has separate pockets and compartments to keep it organised

Thanks but 28 minutes is loooooong video.

Hi Mate I want to use one of these boxes for my camera gear, but can you tell me if the screwdriver holders and hammer store can be removed. I bought a cheap 2 piece box from Lidl ages ago but it’s no good for dragging across fields etc as the ground clearance is not good. That box looks quite raised up. Cheers Quinny

It's 2024 and your video just worked on an old brother MFC 7820N. It had been in storage for a while, but was working when I put it in storage. I planned on gifting the old workhorse to somebody who really needed a dependable printer. When I first turned it on, the screen was just a green blank display. It was getting power but wouldn't respond to any buttons and needed to be reset. I followed your procedure twice and now It has risen from the grave. it's back to life! Thank you for sharing!

Jeezus h but this guy is dumb! Holes all the way up the barrel THEN a great big rectangle....???

it worked for me but after 3 mins it didnt work help

لا استطيع ضبط الكامرا بالإنترنت

Scooby Doo!. 20 minutes all wired up worked a treat. Saved on a new battery. Kudos. Thanks and God bess

It is very dangerous because when you cut steel with a angle grinder it makes sparks and sparks are very hot and it can burn you want wher you thinking

Megutasto

This machine sucks

How many year/month did the recover faulty battery work well again?

Awesome, there is room here for me to route out a spot for a recessed power outlet, I just wanted to know how thick the chipboard was around the edges.

Good job and easy to understand. Thank you!

If I press the option cancel to delete the wireless setting, the GP switched in the start modus. He doesn't confirm it - do you know why ???

Thanks for showing the bag , I’ve just ordered 2 cheers

Thanks for doing this video. Saved me a lot of time! Now I know I have to go and buy the glue 😂